GW Instek GPR Series

High Output DC Power Supply
•Models from 18V/50A to 1000V/0.5A 500W to 900W
•0.01% high regulation
•constant voltage and constant current modes
•ten turn pot adjustment

GW Instek GPS-Series

Single DC Power supply.
• Models from 54W to 90Watt
• constant voltage or constant current operating modes
•low ripple & noise
•digital or analog readouts available
•overload & reverse polarity protection

GW Instek GPS-X303 Series

Multiple Output Linear PSU.

• Typically 200Watt
• 4 Independent Isolated Output
• Four "3 Digits" LED Displays
• 0.01% Load and Line Regulation
• Low Ripple and Noise
• Tracking Operation and Auto
• Series/Parallel Operation
• Output ON/OFF Switch
• Output Voltage and Current Setting When Output Disable
• Fan Speed Control Circuit to Minimize Fan Noise
• Over Load and Reverse Polarity Protection
• Optional European Jack Type Terminal

GW Instek PSH-Series

• Wide input voltage range and high power factor (P.F)
• High efficiency and high power density
• Constant voltage and constant current operation
• Over voltage over current and over temperature protection
• Low ripple and noise
• Output on/off control
• Self-test and software calibration
• Labview driver
• Standard interface : RS-232C
• Optional interface : GPIB ( IEEE-488.2 )

GW Instek PSP - Series

• LCD display
• Output on/off control
• 3-step fan speed control
• Voltage/current/power settings
• Key lock to avoid operation error
• OVP, OCP & OPP protection
• Normal, +% & -% output operation key
• High efficiency and high power density
• Standard interface：RS-232C
• Optional European type jack terminal

GW Instek SPD 3606

3 Output DC Power Supply.
•3 independant isolated outputs
•Ch1/Ch2 can be set for 30V/6A or 60V/3A operation
•Ch3 is adjustable from 0.1 to 5V/3A
•375Watt
•over temp protection
•constant current and constant voltage operation modes

GW Instek SPS - Series

• Dual Measurement Display
• 0.01 % High Regulation
• Constant Voltage and Constant Current Operation
• High Efficiency
• High Power Density
• Over Voltage Protection
• Remote Output ON/OFF Control

Motech DS Series

The DS Series offers 1440 Watts in a 1U package.
Features:
•Universal input voltage (AC 100 to 240V, 47 to 63Hz)
•User-friendly front panel operation
•High precision V&I measurement
•1mV/1mA high resolution setting
•Low ripple and low noise
•Power factor correction (0.99 typ.)
•OVP/OCP/OPP/OTP protection
•Remote sense compensation: 2V
•Parallel/serial up to 10 units for higher power
•Analog programming
•Auxiliary 5V/1A on/off output
•10 store/recall memories
•10 programs with 150 steps to generate testing patterns
•CE Certificate
•Standard USB interface (virtual com port)
•Optional GPIB/LAN two-in-one interface

Topward 3000 Series

Single DC Power Supply.
• various models with voltages up to 36VDC and currents up to 10A.
• constant voltage and constant current operation
• low ripple & noise

Topward 6000 Series

Dual DC Power Supply.
• various models with Voltages up to 60 VDC and currents up to 6A
• additional 5V/5A fixed output
• constant voltage and constant current operating modes
• low ripple & noise