Hydran M2

Fault Gas & Moisture Monitor.
• provides early warning of transformer fault conditions that could result in equipment failures or unscheduled outages
• measures composite value of gases generated by faults and oil moisture level

TMC 4001

Portable Battery Monitoring System.
• measures cell voltages
• measures terminal voltage
• masures string current
• various models up to 127 channels

AEMC 6250

Model 6250 is a Micro Ohm Meter with test currents 1mA, 10mA, 100mA, 1A, and 10A. Measuring range is 0.0001Ω to 2500Ω with a resolution of 0.1μ Ω Stores upto 1500 test results and has automatic report generation. See data sheet for more details.

Baur Frida VLF

VLF 0.01 - 0.1Hz 23KV RMS, 30KV Peak Very Low Frequency portable test set. Fully automated test sequences for VLF, DC, and Cable sheath testing and defect location. Integrated discharging device. Extendable to diagnosis system for tan delta and partial discharge measurement

Baur IRG 2000

The pulse reflection test set IRG 2000 is a portable, easy to use, single-phase unit for cable fault pre-location using the time domain reflection (TDR) method on low, medium and high voltage cables. It can also be used on live cables up to 400 V. Further fault location methods are available with the application of the appropriate coupling device. Its measuring ranges enable pre-location on cable lengths from 0 m to 65 km (0 to 213,000 feet). The IRG 2000 is operated by function keys and is fully menu-guided. The LCD colour screen allows up to three waveforms to be displayed at the same time. The unit is supplied with rechargeable batteries and can also be powered directly by mains supply.

Baur IRG3000

The computer aided pulse reflection test system IRG 3000 is the basic control unit for all cable fault location methods. It is specially designed as a pulse reflection measuring instrument for fault location on single and three-phase cable systems. Latest generation technology is implemented in the expert system, with an integrated 200 MHz transient recorder for the highest measuring accuracy. It offers unique features for intelligent manual and automatic cable fault location.

The windows-based software allows every user easy and fast operation of the system. Up to three cable fault location methods can be displayed at the same time on the TFT-LCD display. The high resolution and zoom function enable accurate pre-location of cable faults. The design of IRG 3000 has set new international standards in automatic cable fault location.

Baur PHG 70

Multifunctional VLF Cable Test & Diagnostic System.
• cable testing using the VLF (Very Low Frequency) principal
• system can be expanded to incorporate TD-Dissipation Factor and PD-Partial Discharge measurements.

Baur Shirla

The shirla is used for cable - and cable sheath testing, fault prelocation as well as for sheath fault pin pointing according to the step voltage method.
The special measuring bridge is performing the measurements according to Murray and Glaser. With the integrated high voltage DC source, shirla allows prelocation of low resistive as well as high resistive cable faults. The measuring principle enables prelocation of faults especially at unshielded control- and lighting cables as well as cable sheath!
Analyses are done automatically and the results are displayed digitally.
For cable fault pin pointing according to the step voltage method, a defined DC pulse pattern is applied and the step voltage can be picked up by using the KMF1 or UL30 receiver set.

Baur STG 600

The low voltage cable fault location system STG 600 includes a surge generator, a high voltage source for testing and precise location of sheath and cable insulation faults. The STG 600 is a multifunctional cable fault locating set especially designed for low voltage power distribution networks. The surge and test generator is used for cable testing and for pin-pointing of high-resistance and intermittent faults in low voltage cables. An optional coupling filter can be integrated in the STG 600 enabling the use of the highly sophisticated and efficient prelocating method: secondary impulse method/multiple impulse method (SIM-MIM).

Baur SYSCOMPACT 3000

The SYSCOMPACT 3000 is a multi-functional cable fault location system in a modular 19” plug-in design. The surge and test generator is designed for testing cables and cable sheaths and precise location of high-resistance and intermittent faults.

The SYSCOMPACT 3000 is used in low and medium voltage networks, for locating faults on cables up to and over 200 km in length. The integration of the latest fault prelocation methods SIM-MIM and impulse current method allows the precise location of high and low-resistance as well as intermittent faults using the IRG 3000 echometer. The IRG 3000 computer-supported impulse-reflection measuring system permits automated cable fault location. For the first time, the software supports a standardised computer link in the user’s language.

Baur UL 30

For pin-pointing of cable faults the digital Universal Locator UL 30 is used with the ground microphone BM 30 and surge voltage generator (SSG/STG).

With its integrated acoustic propagation time measurement the UL 30 displays the distance to the fault in metres and indicates the position if the fault is reached. The special feature of UL 30 is the calculation of the fault distance between two manholes.

In combination with the audio frequency transmitter (TG) and detecting rod (SP 30) the UL 30 is used for route tracing and depth evaluation of electric lines and cables.

Baur VIOLA VLF

VLF 0.01 - 0.1Hz 40KV RMS, 60KV Peak Very Low Frequency portable test set. Fully automated test sequences for VLF, DC, and Cable sheath testing and defect location. Integrated discharging device. Extendable to diagnosis system for tan delta and partial discharge measurement
Two-part design, portable testing equipment.

High Voltage Diagnostics Inc HVA 30

VLF 0.02 -0.1 Hz 23KVRMS 33KV Peak. Test set has a weight of 20Kg and is a 4 in 1 test set as it can carry out VLF, DC, Jacket/Sheath, and Fault conditioning. Option for Tan Delta measurement.

High Voltage Diagnostics Inc HVA 60

VLF 0.02 - 0.1 Hz 44KVRMS 60KV Peak. Test set weighs in at 60Kg's and is a 4 in 1 test set as it can carry out VLF, DC, Jacket/Sheath, and Fault conditioning. Option for Tan Delta measurement.

Hioki 3454-11

Insulation Tester.
• 250/500/1000VDC voltage ranges
• 4000MΩ measurement range
• low resistance measurement
• comparator mode
• live wire warning

Hioki 3455

The Hioki 3455 5KV Insulation tester has a test voltage of 250V-5KV with an insulation resistance up to 5TΩ automatic calculation of PI and DAR, step voltage, temperature compensation, temperature measurement, and leakage current display. Data storage and USB port with software downloadable from the hioki website for free. See data sheet for more information

ISA BTS 200

Battery Discharge Tester.
• Constant current or constant power discharge testing of battery banks
• 24 to 240 battery bank voltage
• discharge currents up to 130 amps
• extra load units can be added for up to 1300 amp discharge current.

ISA CBA 1000

Circuit Breaker Analyzer and Microhmmeter
This circuit breaker timing test equipment is a reliable and very accurate operating device for the maintenance and commissioning of circuit breakers in medium and high voltage substation. It can perform static and dynamic contact resistance measurement and it’s an accurate timing speed and motion analyzer.
• Circuit Breaker timing test set suitable for EHV, HV and MV circuit breakers
• Optional 200 A microhmmeter - static and dynamic contact resistance measurement
• 6 main and 6 resistive contact inputs
• Up to 4 trip/close coils control
• 7 analog inputs
• 4 auxiliary timing contact
• Circuit Breaker test with two ends connected to ground (BSG option)
• Cross trigger for the synchronization of up to 4 CBA 1000
• Stand alone functionality - no PC connection is required
• Analysis and result evaluation directly on the display
• Internal memory for up to 250 test results and 64 pre-defined test plans
• USB and RS232 port

ISA CBA 2000

HV Circuit Breaker Analyser and Micro-ohmmeter.
This circuit breaker diagnostic system is designed to deliver the highest accuracy while testing circuit breaker. It can perform static and dynamic contact resistance measurement and it’s a precise timing speed and motion analyzer. Circuit breaker timing test set CBA 2000 is worldwide acknowledged as the perfect solution when a complete and reliable diagnostics has to be performed on circuit breakers.
• Designed for the complete test of all circuit breakers
• Built-in 200 A microhmmeter - static and dynamic contact resistance measurement
• 12 auxiliary timing inputs
• Up to 4 trip/close coils control
• Up to 18 main and 18 resistive contact inputs
• Circuit Breaker test with both sides connected to ground (BSG option)
• Digital transducer option for motion analysis
• Minimum Trip Voltage Test (optional)
• Stand alone functionality - no PC connection is required
• Analysis and result evaluation directly on the display
• Internal memory for up to 500 test results and 64 pre-defined test plans

ISA T2000

This portable current transformer test set allows to perform many different measurements such as saturation, ratio and polarity tests and CT winding resistance test. Substation maintenance and commissioning test equipment T 2000 is extremely appreciated by electrical engineers for its high accuracy and portability.
• Multi function system for testing: current, voltage and power transformers
• Current transformer excitation, ratio and polarity test set
• Primary injection testing capabilities
• 3000 V AC high-pot test
• Generates up to 800 A (option up to 4000A with high current booster)
• Microhmmeter function (option): up to 400A DC
• RS232 interface for pc connection
• Test results and settings are saved into local memory
• Compact and lightweight: 26 kg

ISA T3000

This primary current injection testing system is designed to perform primary tests requested in substations commissioning. It allows to perform different tests and measurements on current transformers, voltage transformers, power transformers, protection relays, energy meters and transducers.
• Multi function primary test system for testing substation equipment such as: current, voltage and power transformers, all type of protection relays, energy meters and transducers
• Primary injection testing capabilities
• 3000 V AC high-pot test
• Generates up to 800 A (option up to 4000A with high current booster)
• Microhmmeter function (option): up to 400A DC
• RS232 interface for pc connection
• Possibility to store test results in T3000 local memory (up to 500 results)
• Compact and lightweight: 29 kg

Megabras MD5060 x

5KV Megohmmeter

• Microprocessor controlled
• Insulation test up to 5 TΩ
• Test voltages: 0,5 kV to 5 kV in 100 V steps
• Short circuit current: 1,5 ± 0,5 mA
• Auto-range
• Automatic measurement of Dielectric Absorption Index (DAI)
• Automatic measurement of Polarization Index (PI)
• Step Voltage Test (SVT)
• Built-in memory for up to 4000 measured values
• Built-in printer
• Real-time clock and calendar
• Programmable Pass-fail test

Megabras Mi10KVe

HIGH VOLTAGE MEGOHMMETER

• Insulation test up to 2.000.000MΩ
• 4 test voltages: 1 kV - 2 kV - 5 kV - 10 kV
• Guard terminal
• Rechargeable battery
• Multiple scales for precision improvement
• Portable, accurate & rugged
• IP-54 protection
• CE mark

Megabras Mi20KVe

HIGH VOLTAGE MEGOHMMETER

• Insulation test up to 4.000.000MΩ
• 4 test voltages: 5 kV - 10 kV - 15 kV - 20 kV
• Guard terminal
• Rechargeable battery
• Multiple scales for precision improvement
• Portable, accurate & rugged
• IP-54 protection
• CE mark

Megabras MPK204

200A portable digital micro-ohmmeter

• Microprocessor controlled
• Alphanumerical display
• Resolution down to: 0,1μΩ
• Resistance reading up to: 200Ω
• Up to 200 A test current
• Kelvin-type (4 - wires) measurement
• Powered by internal battery or mains supply
• Direct reading (up to 41/2 digits)
• Overheating protection
• Serial data output (RS-232)
• Lightweight (16 kg)

Megabras MPK253

10 A portable digital micro-ohmmeter

• Very low resistance measurement
• 1μΩ resolution
• 41/2 digits reading
• Alphanumerical display
• Heavy duty equipment
• Rechargeable battery
• Up to 10 A test current
• 0,25% basic accuracy
• Offset free reading
• RS-232 data output
• IP-54 protection
• CE mark

Phenix Technologies PATTR-03

3 Phase Transformer Turns Ratio Test Set.
• turns ratio measurement
• excitation current measurement
• measurement of phase angle
• on board printer.

Red Phase 590

CT/PT Test Set.
• Insitu and static testing of CT's (current transformers)

Schonstedt Tracemaster II

Pipe and Cable Locator.
• 4 active transmitter frequencies
• One button depth measurement
• passive 50Hz detection
• digital readout of signal strength
• conductively or inductively couple the transmitter to the cable
• sonde options for non metallic pipe

Schonstedt XTpC

Pipe and Cable locator.
• Compact retractable receiver
• small lightweight transmitter
• one button depth measurement
• passive 50 Hz detection
• automatic gain control
• conductively or inductively couple to cable
• sonde options for non metallic pipe

T&R DSM 200

High Current Micro-Ohmmeter

• 0-10A and 0-200A DC test current
• 0.1μΩ resolution
• mV, A, and μΩ displayed simultaneously
• Direct Ohms reading at any current
• Large back-lit liquid crystal display
• Thermal and over-current protection
• Compact and portable
• Isolated RS232 interface for printer or PC
• Triple supply voltage
• Microprocessor controlled