Anritsu CMA4500

Nettest Optical Time Domain Reflectometer.
•PC based unit with high reolution colour display
•touch screen and hard key user interfaces
• single or multimode models to test from 1 metre to 250Km
•Dual USB and 10/100 ethernet interfaces
•optional light source, power meter, viual fault locator and connector inspection microscope.

Anritsu CMA5000

Nettest multilayer network testing platform.
Testing of 1 and 10 Gigabit Ethernet, DWDM, Sonet/SDH, OTDR, ORL, PWD and CD with plug in modules.
Modules include:
•XTA eXtended Transport Analysis for Sonet/SDH networks from 1.5Mbps to 10Gbps
•OTDR various modules covering single mode and multimode applications
•CD-OTDR combined OTDR and chromatic dispersion measurement module
•OSA DWDM/CWDM optical spectrum analyser modules
•PMD Polarisation Mode Dispersion Analyser
•Ethernet modules for analsis of 10/100/1000 or 10Gigabit Ethernet networks

Anritsu CMA50LS

Nettest Optical Light Source.
Stable source for point to point attenuation measurement.
•up to 4 wavelengths per unit, out of a single port
•high power and stable output for high dynamic range testing
•auto wavelength switching
•visual fault locator option
•interchangeable optical connectors

Anritsu CMA50LTS

Nettest Optical Loss Test Set.
Attenuation and power throughput measurements on fibre optic links
•up to 4 high power sources per unit, out of a single port
•EZtest one button biderectional measurement option
•visual fault locator option
•stores up to 100,000 data sets
•USB file transfer

Anritsu CMA50PM

Nettest Optical Power Meter.
Attenuation and throughput measurements of fibre optic links.
•auto synchronisation with CMA series light sources
•high input power capability
•visual fault locator option
•stores 100,000 data sets
•USB file transfer

Anritsu CMA5LS

Nettest Optical Light Source.
Provide an economical and stable laser source for use in point to point attenuation measurement.
•single and multimode models.
•single and dual wavelength models with single output port
•modulation tones

Anritsu CMA5PM

Nettest Optical Power Meter.
Economical power meter for attenuation and power throughput measurements for point to point optical links.
•zero warm up time
•auto zero
•850/1300/1310/1490/1550/1625nm calibrated wavelengths

Anritsu MD1231A

IP Network Analyser.
Measurements include:
• in service traffic
• latency and frame jitter
• physical interfaces for 10Mbit/s to 1 Gbit/s.

Anritsu ML2400

RF Power Meter.
• 100KHz to 90GHz frequency range
(sensor dependant).
• Single or Dual input options.
• Graphical display of pulse signals.
• Portable, battery operation.

Anritsu MT 8222A BTS Master

Analyser for deploying, maintaining and troubleshooting 2G/2.5G, 3G, and 4G wireless base stations. The BTS Master is a combination of our popular Spectrum Master MS2721B and VNA Master MS2024A offered as one handheld solution. The functionality of the BTS Master is:

•Built-in spectrum analyzer (100 kHz to 7.1 GHz)
•Built-in cable and antenna analyzer (10 MHz to 4 GHz, 10 MHz to 6 GHz optional)
•Built-in power meter (10 MHz to 7.1 GHz)
•Transmitter analyzer (LTE, WCDMA/HSDPA, GSM/GPRS/EDGE, WiMAX, CDMA, EVDO, TD-SCDMA)
•Interference analyzer (100 kHz to 7.1 GHz)
•Channel scanner (100 kHz to 7.1 GHz)
•High Accuracy Power Meter (per power sensor specifications)
•Power monitor (100kHz to 50 GHz)
•Built-in variable Bias Tee (12V-32V)
•T1/FT1 analyzer
•T3/T1/FT1 analyzer
•2 Mb/s - E1 analyzer
•GPS receiver

Anritsu MT821xE Cellmaster Series

Base Station Analyzer. The smallest, lightest, and most economical solution for 2/3G/4G, WiMAX, and ISDB-T base station transmitter testing. Its ideal for installation and commissioning as well as for maintenance and troubleshooting.

•30 Analyzers in one
•3GPP, 3GPP2, WiMAX, signal analyzers
•Easy-to-use Touch screen
•USB connectivity
•Most compact handheld

Cable and Antenna Analyzer Highlights
•Measurements: RL, VSWR, Cable Loss, DTF, Phase
•2-port Transmission Measurement: High/Low Power
•Sweep Speed: 1 msec/data point, typical
•Display : Single or Dual Measurement Touchscreen
•Calibration: OSL, InstaCal, and FlexCal
•Bias Tee: 32 V internal

Spectrum and Interference Analyzer Highlights
•Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I
•Interference Analyzer: Spectrogram, Signal Strength, RSSI, Signal ID
•Dynamic Range: > 95 dB in 10 Hz RBW
•DANL: -152 dBm in 10 Hz RBW
•Phase Noise: -100 dBc/Hz max @ 10 kHz offset at 1 GHz
•Frequency Accuracy: <±50 ppb with GPS On

Anritsu MT9083A

Optical Time Domain Reflectometer.
For the maintenance of access, FTTx, Lan and metro networks.
•models for multimode 850/1300nm
•models for single mode 780/1310/1383/1490/1550/1625/1650nm
•fast start up
•long battery life
•tests up to 4 wavelengths with a single unit
•large data storage capability

Anritsu Sitemaster E Series

Cable, Antenna and Base Station Analyser For the Installation and Maintenance of Wireless Networks.
S331E 2MHz to 4 GHz (No Spec An)
S332E 2MHz to 4GHz
100KHz to 4GHz Spec An
S361E 2MHz to 6GHz (No Spec An)
S362E 2MHz to 6 GHz
100KHz to 6 GHz Spec An
Cable and Antenna Analyser Highlights:
• transmission line return loss/VSWR
• cable loss
• distance to fault(DTF)
• 2 port transmission measurement option
Spectrum analyser Highlights
• Occupied Bandwidth
• channel power
• interference analyser option
• power meter option.

Anritsu VIP

Video Inspection Probe.
The Video Inspection Probe (VIP) application for the CMA 5000 and CMA 4500 gives operators a safe, easy way to analyze and document connector conditions.
•400X magnification
•interchangeable connector types
•USB for connection to OTDR or Laptop
•advanced pass/fail software option